BilletsUpdated 6 months ago

Warranty Information

1-year warranty for your product

Fitment Information

This product doesn't have specific fitment requirements. It should be relatively versatile for various applications.

Wiring Information

Here's what you need to know about wiring:

• Connect it to a 12V power source.

• You can easily install it through the inner fender liner by drilling a 3/8” hole.

Troubleshooting: LEDs Not Working

If you encounter an issue with LEDs not working, here are some steps to diagnose and address the problem:

1. Double-Check Connections: Ensure all connections are secure and free from corrosion.

2. Check the Cable at the Base: Ask the customer to gently move the cable at the base of the billet while it's powered on. Look for any changes in the light, such as flickering.

   • If an issue is found, it's a good indicator that something might be wrong. Please replace it using the photo warranty process described below.

3. Test the Billets Directly: Have the customer test the billets by connecting them directly to the battery.

   • If they come on as expected, this suggests a potential issue with the wiring. Recheck and correct any wiring problems.

   • If the billets do not illuminate when connected to the battery, please contact customer service.